Ilsintech K-7 Fusion Splicer | Core to Core | Panca Wahyu Mandiri

nternet remote access maintenance
Resistance to Shock, Dust and Water
4.3-inch Color LCD Monitor with Touch Screen
Built-in Dual Sleeve Heater
Auto-Calibration
Powerful Lithium Polymer Battery with Large Capacity.

Product Overview

Swift K7 is the advanced typical core alignment type
fusion splicer for the medium & long range optical circuit LAN, CATV, FTTx with world-fastest in splicing & sleeve heating time. It delivers high precision performance with low loss.

Compare

Description

ILSINTECH SWIFT K7 FUSION SPLICER Paling MURAH

 

SWIFT K7  Core to Core Alignment

Swift K7 is the advanced typical core alignment type fusion splicer for the medium & long range optical circuit LAN, CATV, FTTx with world-fastest in splicing & sleeve heating time. It delivers high precision performance with low loss

l BENEFITS AND FEATURES
Internet remote access maintenance

 

 

IPAAS Technology Basis Core Alignment

     ▶ Swift K7 is the core alignment splicer based on the IPAAS (Image Pattern Analysis Alignment System)

Technology. The fine pixel technology perfects lowest splice loss in average

Compact, Lightweight and Fast
     ▶ This splicer is one of the smallest, lightest and fastest among all the existing core alignment splicers.

      l Dimension : 143(W) x 163(L) x 140(H) l Weight : 2.25kg l Splicing Time : 6 seconds

 l Tube heat : 9sec(IS-45 Sleeve, IS-45mode),13sec(IS-60 Sleeve, IS-60mode),

Resistance to Shock, Dust and Water
     ▶ The splicer with high reliability has stable performance even in a harsh environment

      l Shock-Free Fall : 76cm from 5 sides l Waterproof : IPx2 l Dustproof : IP5x

Powerful Lithium Polymer Battery with Large Capacity
     ▶ Performs 300 cycles of fusion splicing and sleeve heating with the standard battery
4.3 inch Color LCD Monitor with Touch Screen
      ▶ For user’s convenience, LCD monitor has been designed with touch screen in addition to

the operation keys.

Bidirectional Operation System

▶ For user’s ergonomic preference, the screen can be turned around for one’s chosen viewing direction.

Equipped with Sleeve Loader to Prevent Contamination and to Provide Convenience

▶ While working in a manhole, the loader prevents the supplementary sleeve from falling and

being contaminated.

▶ Working in aerial space such as telephone pole, the loader also prevents the supplementary sleeve

from falling down.

 
 
Auto-Calibration

▶ Detects the surrounding environment of temperature, humidity, air pressure and measures

discharge calibration rate automatically.

Compatible with Fusion Splice-On Connector(SOC) in accordance with the Industrial Standard

▶ MS-01, the manual stripper for Swift Connector

l SPECIFICATIONS
Category Description
Fiber alignment IPAAS core to core alignment(Image pattern analysis alignment system)
Applicable type of fibers SM(ITU-T G.652),MM(ITU-T G.651), DS(ITU-T G.653),

NZDS(ITU-TG.655),ITU-T G.657

Fiber count Single fiber
Applicable fiber dimensions Cladding diameter: 80 ~ 150㎛, Coating diameter: 100 ~ 1000㎛
Fiber setting and cleaved length 250㎛: 8~16mm
Splicing modes Splice mode: 300, Heat mode: 100
Typical Splice Loss SMF: 0.02dB, MMF: 0.01dB, DSF: 0.04dB, NZDSF: 0.04dB
Return Loss > 60dB
Splicing Time Typical 6sec
Splice loss estimate Available
Sleeve heating time 9sec (IS-45 Sleeve, IS-45 mode), 13sec (IS-60 Sleeve, IS-60 mode)
Applicable protection sleeve 40mm, 60mm, 32mm or 28mm for SOC
Storage of splice result The last 10,000 results to be stored in the internal memory.

(Image 10,000 results)

Tension test 2N / 4.4N
Operating condition Altitude: 0~5,000m above sea level, Temperature: -10℃~50℃, Humidity: 0~95%, Wind: 15m/s, non-condensing, dust proof, water proof, shock proof
Storage condition Temperature: -40℃~80℃, Humidity: 0~95%
Dimension 143(W) x 163(L) x 140(H)mm (Without Bumper)
Weight With battery 2.25kg
Viewing method and display Two CMOS cameras and 5.0-inch color touch LCD
Fiber view and magnification X/Y : 200X, Max 400X
Power supply DC Lithium polymer battery (DC 14.8V, 4700, 6000mAh-option),

100~240V AC Adapter

No. of splice cycles with battery 300cycle
Electrode life More than 3,500 times
Terminals USB, RCA, External Power(DC 12V Available for car cigar jack)
l STANDARD PACKAGE
Category Model Q’ty
Arc Fusion Splicer K7 1
AC Adapter F1-1 1
USB Cable 1
User Manual 1
Sleeve Loader S312 2
Spare Electrode EI-21 1 pair
Battery Pack K713 1
Colling Tray CT-03 1
Manual Stripper CF-02 1
Tool Box 1
Carrying Case Hard Case 1
Alcohol Dispenser 1
l OPTION PACKAGE
Category Model
Battery Pack K713
Fiber Cleaver CS-03A
Cleaver Blade BI-05
Electrode EI-21
Fiber Holder HS-250, HS-900, HS-2.5, HS-IN,HS-SC/FC, HS-LC, HS-ST,LS-900
Sleeve S-160(60mm),S-140(40mm)

IS-60(60mm), IS-45(45mm)

Sleeving Clamp  SC-01
SOC Connector SC, LC, FC, ST (Refer to FTTx Solution catalogue)
Cleaver CS-03A
External Power DC 12V Available for car cigar jack

 

Reviews

There are no reviews yet.

Be the first to review “Ilsintech K-7 Fusion Splicer | Core to Core | Panca Wahyu Mandiri”